- New
- New
Home
BRP OEM glove box door for Sea-Doo. Provides secure access to the front storage compartment with a closure resistant to water spray and vibrations. Guaranteed original part.
Opening HoursMardi au Samedi : 9h-17h
605 products
Grid
Grid-2
List
List-2
Catelog
- New
- New
Home
BRP OEM right-hand mirror assembly for Sea-Doo. Complete original right-side rearview mirror with housing, glass and pivot mechanism, UV and salt water resistant. Assembled part ready to install.
- New
- New
Home
BRP OEM right-hand mirror shell assembly for Sea-Doo. Right-side rearview mirror housing protecting the mechanism and glass while ensuring original aesthetics. UV and salt water resistant.
- New
- New
Home
BRP OEM white left-hand mirror shell for Sea-Doo. Left-side rearview mirror housing in white finish, protecting the glass and mechanism while ensuring original aesthetics. UV and salt water resistant.
- New
- New
Home
BRP OEM left-hand side moulding for Sea-Doo. Provides original left-side aesthetic bodywork trim, resistant to UV rays and salt water. Direct fit, guaranteed original part.
- New
- New
Home
BRP OEM storage tray assembly for Sea-Doo. On-board storage space for equipment and accessories, with UV and salt water resistant construction. Complete assembled part ready to install.
- New
- New
Home
BRP OEM extinguisher tray for Sea-Doo. Supports and secures the on-board fire extinguisher in position, meeting maritime safety regulatory requirements. Guaranteed original part.
- New
- New
Home
BRP OEM retaining strap for Sea-Doo. Retains and secures equipment, accessories or components on board the jet ski, resistant to UV rays, salt water and repeated tension. Sold individually.
- New
- New
Home
BRP OEM latch for Sea-Doo. Ensures secure closure and hold for the jet ski's panels, hatches and storage compartments, resistant to vibrations and marine water spray. Sold individually.
- New
- New
Home
BRP OEM mirror spring for Sea-Doo. Holds the rearview mirror in position and provides spring return after pivoting, resistant to marine corrosion and repeated cycles. Sold individually.
- New
- New
Home
BRP OEM passenger seat B-496 assembly for Sea-Doo. Original comfort and support for the passenger, resistant to UV rays, salt water and wear. Complete assembled part ready to install.
- New
- New
Home
BRP OEM driver seat B-496 assembly for Sea-Doo. Original comfort and support for the driver, resistant to UV rays, salt water and wear. Complete assembled part ready to install.
- New
- New
Home
BRP OEM passenger seat B-408 assembly for Sea-Doo. Original comfort and support for the passenger, resistant to UV rays, salt water and wear. Complete assembled part ready to install.
- New
- New
Home
BRP OEM seat strap B-418 for Sea-Doo. Ensures secure hold and fastening of the seat in position while riding, resistant to UV rays, salt water and repeated mechanical tension. Sold individually.
- New
- New
Home
BRP OEM rear handle B-160 assembly for Sea-Doo. Provides secure hold for rear passenger(s), complete assembled part ready to install. UV and salt water resistant.
- New
- New
Home
BRP OEM seat handle for Sea-Doo. Provides the passenger with a secure, ergonomic grip for safety while riding, resistant to UV rays and salt water spray. Guaranteed original part.
- New
- New
Home
BRP OEM right-hand front seat protector for Sea-Doo. Provides protection and aesthetic trim for the front right corner of the jet ski seat, resistant to UV rays, salt water and abrasion. Sold individually.
- New
- New
Home
BRP OEM cylinder end fitting for Sea-Doo. Ensures termination, protection and sealing of the cylinder end, resistant to marine conditions and mechanical pressures. Sold individually.
- New
- New
Home
BRP OEM left-hand front seat protector for Sea-Doo. Provides protection and aesthetic trim for the front left corner of the jet ski seat, resistant to UV rays, salt water and abrasion. Sold individually.
- New
- New
Home
BRP OEM IBR guard for Sea-Doo. Protects the IBR (Intelligent Braking and Reverse) mechanism against impacts, aquatic debris and foreign objects that could damage the jet ski's reverse and braking system.
- New
- New
Home
BRP OEM anodized reverse bracket for Sea-Doo. Anodized aluminum load-bearing structure for the IBR reverse mechanism, resistant to marine corrosion and mechanical stress for long-term system reliability.
- New
- New
Home
BRP OEM anodized actuating rod for Sea-Doo. Provides precise mechanical control of the IBR reverse gate, in anodized aluminum for optimal resistance to marine corrosion and repeated mechanical stress. Guaranteed original part.
- New
- New
Home
BRP OEM plain bearing for Sea-Doo. Provides low-friction rotational guidance for IBR (Intelligent Braking and Reverse) system moving parts, resistant to marine corrosion and mechanical loads. Sold individually.
- New
- New
Home
BRP OEM watertight gasket for Sea-Doo. Provides enhanced and reliable sealing of IBR reverse circuit assemblies against pressurized water ingress and fluid leaks. Sold individually.
- New
- New
Home
BRP OEM socket head screw M8×13 for Sea-Doo. Internal hex socket fastener allowing precise high-torque tightening, in marine corrosion resistant steel. Sold individually.
- New
- New
Home
BRP OEM M32 nut for Sea-Doo. Large M32 threaded fastener ensuring secure tightening of IBR or propulsion structural assemblies, resistant to vibration and marine corrosion. Sold individually.
- New
- New
Home
BRP OEM gasket for Sea-Doo. Ensures perfect sealing of IBR (Intelligent Braking and Reverse) system assemblies against water ingress and leaks, guaranteeing proper reverse circuit operation. Sold individually.
- New
- New
Home
BRP OEM IBR bushing for Sea-Doo. Spacing and guiding sleeve ensuring precise positioning of moving parts in the IBR (Intelligent Braking and Reverse) system. Sold individually.
- New
- New
Home
BRP OEM right-hand support plate for Sea-Doo. Provides structural support for the right side of the IBR reverse system, holding components in position and absorbing mechanical stress during reverse actuation.
- New
- New
Home
BRP OEM left-hand support plate assembly for Sea-Doo. Provides structural support for the left side of the IBR reverse system, holding components in position and absorbing mechanical stress during actuation. Complete assembled part.
- New
- New
Home
BRP OEM right-hand formed seal for Sea-Doo. Pre-formed seal ensuring watertight sealing of the right side of the reverse (IBR) circuit against water ingress and fluid leaks. Sold individually.
- New
- New
Home
BRP OEM spacer for Sea-Doo IBR system. Maintains precise spacing between IBR reverse system components, ensuring correct alignment and operation of the complete reverse control assembly. Sold individually.
- New
- New
Home
BRP OEM friction sleeve for Sea-Doo. Provides controlled friction force transmission between components, allowing limited slip under overload to protect the mechanism. Sold individually.
- New
- New
Home
BRP OEM machined reverse gate for Sea-Doo. Key component of the IBR (Intelligent Braking and Reverse) system, deflects propulsion flow to provide precise and reliable reverse and braking operation.
- New
- New
Home
BRP OEM impeller assembly for Sea-Doo. Ensures optimal hydraulic propulsion with guaranteed original performance. Direct replacement, installation without modification. Guaranteed OEM part.
- New
- New
Home
BRP OEM stainless impeller assembly for Sea-Doo. Stainless steel provides superior resistance to cavitation, abrasion and marine corrosion, for optimal propulsion performance and greater durability than composite impellers.
- New
- New
Home
BRP OEM stainless machined wear ring for Sea-Doo. Machined stainless steel provides superior durability against marine corrosion and abrasion while maintaining the precise tolerances needed for optimal propulsion performance.
- New
- New
Home
BRP OEM formed return hose for Sea-Doo. Pre-formed rubber hose resistant to marine fluids, heat and pressure, routing the propulsion circuit water return to the outlet. Guaranteed original part.
- New
- New
Home
BRP OEM machined wear ring for Sea-Doo. Machined to original precise tolerances for optimal impeller clearance, restoring original propulsion performance. Check compatibility with your model.
- New
- New
Home
BRP OEM stainless steel impeller assembly for Sea-Doo. Stainless steel provides superior resistance to cavitation, abrasion and marine corrosion compared to composite impellers, for lasting optimal performance.
- New
- New
Home
BRP OEM machined wear ring for Sea-Doo Spark 900cc. Restores precise clearance between impeller and pump housing to recover optimal thrust from the Rotax 900cc ACE engine. Replace when performance loss is observed.
Cones anti-cavitation / Cones de turbine
- New
- New
Cones anti-cavitation / Cones de turbine
BRP OEM impeller boot for Sea-Doo Spark (2014-2026). Protects the impeller and propulsion shaft against debris, weeds and foreign objects that could damage the propulsion system. Compatible with most Spark models from 2014 to 2026.
- New
- New
Bagues d'usure
BRP OEM wear ring for Sea-Doo RXT-X 300, GTX LTD 300, RXP and RXT. Restores precise impeller/housing clearance to recover maximum thrust on high-performance models. Replace when top speed loss is observed.
- New
- New
Home
BRP OEM impeller cone for Sea-Doo Spark. Deflects and accelerates water flow at the propulsion pump outlet, optimizing thrust and Spark performance. Guaranteed original part.
Pièces de turbine
- New
- New
Pièces de turbine
BRP OEM impeller shaft for Sea-Doo Spark 2-UP and 3-UP. High-strength stainless steel transmits 900cc engine power to the propulsion impeller with precision and reliability. Guaranteed OEM part.
- New
- New
Home
BRP OEM black plastic adhesive plug for Sea-Doo. Provides watertight and aesthetic closure of openings, bores or cable passage holes in the jet ski bodywork, resistant to UV and salt water. Sold individually.
- New
- New
Home
BRP OEM impeller cover for Sea-Doo. Closes and protects the propulsion pump housing, channeling water flow through the impeller for maximum propulsion efficiency. Guaranteed original part.
- New
- -20%
- New
- -20%
Bagues d'usure
BRP OEM wear ring for Sea-Doo GTX 4-TEC, GTI 130 and GTI 155. Restores precise clearance between impeller and pump housing for original thrust and propulsion performance. Replace when performance loss is observed.
00
day
00
hour
00
min
00
sec
Pièces de turbine
- New
- New
Pièces de turbine
BRP OEM impeller shaft for Sea-Doo GTX IS 255, GTX 215 and GTX 155. High-strength stainless steel, transmits engine power to the propulsion impeller with precision and reliability. Guaranteed original part.
- New
- New
Home
BRP OEM strainer fitting for Sea-Doo. Provides watertight and secure connection between the water intake strainer and the hydraulic propulsion circuit, resistant to pressure and marine corrosion. Sold individually.
- New
- New
Home
BRP OEM machined wear ring for Sea-Doo. Machined to precise tolerances for optimal impeller clearance, restoring original propulsion performance. Replacement recommended when performance loss is observed.
- New
- New
Home
BRP OEM strainer plug for Sea-Doo. Provides watertight sealing of the water intake strainer housing in the propulsion circuit, resistant to hydraulic pressure and marine corrosion. Sold individually.
- New
- New
Home
BRP OEM wear ring for Sea-Doo RXT, RXP, GTX, Wake and Pro. Restores optimal clearance between the impeller and pump housing to recover original propulsion performance. Replace when performance decreases.
- New
- New
Home
BRP OEM impeller shaft for Sea-Doo. Transmits engine power to the propulsion circuit impeller, in stainless steel resistant to marine corrosion and torsional stress. Guaranteed original part.
- New
- New
Home
BRP OEM black trim ring for Sea-Doo. Ensures load distribution under fastening and a clean aesthetic finish around fixing points, resistant to marine conditions. Sold individually.
- New
- New
Home
BRP OEM spacer for Sea-Doo. Maintains precise spacing between mechanical components, ensuring correct alignment and optimal force transmission in jet ski assemblies. Sold individually.
- New
- New
Home
BRP OEM lever for Sea-Doo. Mechanical control component enabling precise actuation of a jet ski mechanism, designed to withstand marine use stresses and ensure reliable operation. Sold individually.
- New
- New
Home
BRP OEM left-hand cylinder support for Sea-Doo. Precisely holds and aligns the left-side engine cylinder, absorbing mechanical and vibratory stresses to ensure drivetrain reliability. Sold individually.
- New
- New
Home
BRP OEM threaded cover assembly for Sea-Doo. Provides watertight and secure sealing of access and maintenance openings via threading, resistant to pressure and marine water spray. Complete assembled part.
- New
- New
Home
BRP OEM air shock absorber assembly for Sea-Doo. Absorbs impacts, dampens vibrations and holds moving parts in position, ensuring smooth and lasting operation of access mechanisms. Sold individually.