- New
- New
Home
BRP OEM intake hose for Sea-Doo. Routes intake air to the engine with resistance to temperatures, pressures and marine conditions for preserved optimal engine performance. Sold individually.
Opening HoursMardi au Samedi : 9h-17h
420 products
Grid
Grid-2
List
List-2
Catelog
- New
- New
Home
BRP OEM intake fitting for Sea-Doo. Provides watertight connection of the original engine air intake circuit, resistant to intake pressures and temperatures for optimal engine operation. Sold individually.
- New
- New
Home
BRP OEM connector hose for Sea-Doo. Provides flexible and watertight connection between two components of the intake or cooling circuit, resistant to high temperatures, salt water and pressures. Sold individually.
- New
- New
Home
BRP OEM upper intake silencer for Sea-Doo. Reduces original engine air intake noise, improving acoustic comfort while optimizing airflow to the engine. Heat and UV resistant.
- New
- New
Home
BRP OEM bellows for Sea-Doo (ref. 272000183). Original flexible sleeve protecting the drive shaft or CV joint against salt water ingress and preserving internal grease. Sold individually.
- New
- New
Home
BRP OEM drive shaft plug for Sea-Doo (ref. 272000173). Provides watertight sealing and protection of the drive shaft end against salt water ingress and foreign objects. Sold individually.
- New
- New
Home
BRP OEM nut for Sea-Doo. Original mechanical fastening part dimensioned to BRP specifications, resistant to marine corrosion and vibrations for optimal long-term hold. Sold individually.
- New
- New
Home
BRP OEM lock washer for Sea-Doo. Prevents spontaneous fastener loosening under marine vibrations, ensuring secure hold of critical mechanical assemblies. Sold individually.
- New
- New
Home
BRP OEM propeller guard assembly for Sea-Doo. Complete original assembled protection for the jet pump impeller, preventing damage from debris and foreign objects while preserving performance. Assembled part ready to install.
Cones d'hélice
- New
- New
Cones d'hélice
BRP OEM propeller guard for Sea-Doo. Original jet pump impeller protection against debris and foreign objects, preserving propulsion performance. Guaranteed original part.
- New
- New
Home
BRP OEM drive shaft for Sea-Doo (ref. 271002214). Part machined to original BRP tolerances for optimal power transmission between engine and jet pump. Check model compatibility.
- New
- New
Home
BRP OEM double row ball bearing for Sea-Doo. Original double row of balls providing doubled radial load capacity for the drive shaft, machined to BRP tolerances. Sold individually.
- New
- New
Home
BRP OEM angular contact bearing for Sea-Doo. Original oblique contact bearing supporting radial and axial loads of the drive shaft, machined to BRP tolerances for optimal precision and durability. Sold individually.
- New
- New
Home
BRP OEM swivel valve for Sea-Doo. Provides pivoting regulation and orientation of fluid flow (water, fuel or air) with angular mobility adapting to dynamic constraints. Marine pressure resistant. Sold individually.
- New
- New
Home
BRP OEM drive shaft plug for Sea-Doo. Seals and protects the drive shaft end against water ingress and foreign objects. Sold individually.
- New
- New
Home
BRP OEM drive shaft for Sea-Doo (ref. 271002103). Engine/pump power transmission machined to original BRP tolerances. Check compatibility with your model. Guaranteed original part.
- New
- New
Home
BRP OEM sealing ring for Sea-Doo. Original O-ring or sealing ring ensuring watertight connection between two components, resistant to water pressure and marine conditions. Sold individually.
- New
- New
Home
BRP OEM seal for Sea-Doo. Ensures dynamic sealing of a rotating shaft, preventing water ingress and lubricant leaks, resistant to water pressure and marine conditions. Sold individually.
- New
- New
Home
BRP OEM drive shaft for Sea-Doo. Ensures power transmission between the engine and the jet pump, machined to BRP tolerances for perfect alignment and optimal durability in marine conditions.
- New
- New
Home
BRP OEM anodized pump intake screen for Sea-Doo. Filters water at the jet pump intake to protect the impeller from debris, with an anodized finish resistant to corrosion. Sold individually.
- New
- New
Home
BRP OEM bellows for Sea-Doo (ref. 271001921). Original flexible sleeve providing watertight protection of the drive shaft or CV joint, resistant to salt water and high pressures. Sold individually.
- New
- New
Home
BRP OEM anodized pump screen for Sea-Doo. Protects the jet pump impeller against debris and foreign objects, with an anodized finish resistant to marine corrosion and wear. Guaranteed original part.
- New
- New
Home
BRP OEM carbon ring for Sea-Doo. Original carbon rotary mechanical seal face for drive shaft stuffing box, ensuring sealing under water pressure and wear resistant. Sold individually.
- New
- New
Home
BRP OEM zinc anode for Sea-Doo. Protects hull and propulsion metal parts against galvanic corrosion in salt and fresh water. Replace regularly according to wear for optimal protection. Sold individually.
- New
- New
Home
BRP OEM bellows for Sea-Doo. Original flexible sleeve providing watertight protection of the drive shaft or CV joint, resistant to salt water and high pressures to preserve internal grease. Sold individually.
- New
- New
Clips
BRP OEM C-clips for Sea-Doo GTR drive shaft. Provide precise original axial drive shaft retention, preventing axial displacement under propulsion stresses. Sea-Doo GTR compatible.
- New
- New
Home
BRP OEM C-clamp for Sea-Doo. Ensures secure fastening and clamping of cooling, fuel or hydraulic circuit hoses or conduits, marine corrosion resistant. Sold individually.
- New
- New
Home
BRP OEM spacer for Sea-Doo. Provides precise mechanical component spacing in compliance with manufacturer specifications, ensuring proper operation and preventing interference. Sold individually.
- New
- New
Home
BRP OEM elbow fitting assembly for Sea-Doo. Provides oriented and watertight connection between hoses or conduits of the cooling, fuel or hydraulic circuit, resistant to pressure and salt water. Sold assembled.
- New
- New
Home
BRP OEM pump support assembly for Sea-Doo. Ensures original jet pump mounting and structural support in the hull, resistant to mechanical stresses and vibrations. Assembled part ready to install.
- New
- New
Home
BRP OEM elastic M10 nut housing assembly for Sea-Doo. M10 floating nut with original anti-loosening elastic insert, enabling fastening without rear access and resistant to marine vibrations. Sold assembled.
- New
- New
Home
BRP OEM push rod for Sea-Doo. Provides precise mechanical movement transmission in the steering or propulsion mechanism, resistant to stresses and marine conditions. Sold individually.
- New
- New
Home
BRP OEM hook lever for Sea-Doo. Provides precise control of a hooking or locking mechanism, resistant to mechanical stresses and marine conditions. Sold individually.
- New
- New
Home
BRP OEM protective hose for Sea-Doo. Original protective sleeve for cables or conduits, resistant to abrasion, UV rays, salt water and high temperatures to preserve equipment integrity. Sold individually.
- New
- New
Home
BRP OEM fuel filter for Sea-Doo. Provides original fuel filtration, trapping impurities and protecting injectors and fuel pump against clogging and premature wear. Recommended maintenance replacement.
- New
- New
Home
BRP OEM solenoid valve for Sea-Doo. Precise electromagnetic control of an engine hydraulic or pneumatic circuit, driven by the original ECU for optimal management. Guaranteed original part.
- New
- New
Home
BRP OEM pressure sensor for Sea-Doo. Provides precise monitoring of engine or hydraulic circuit pressure, transmitting data to the original ECU for optimal engine management. Guaranteed original part.
- New
- New
Home
BRP OEM lateral engine mount assembly for Sea-Doo. Original lateral anti-vibration silent block ensuring engine mounting and vibration damping in lateral position. Assembled part ready to install.
Silents blocks
- New
- New
Silents blocks
BRP OEM engine mount assembly for Sea-Doo (ref. 270001096). Complete original anti-vibration silent block ensuring engine mounting and vibration absorption. Check compatibility with your model.
- New
- New
Home
BRP OEM rubber stop for Sea-Doo. Provides travel limiting and damping for a mechanism, absorbing shocks and vibrations while protecting adjacent parts. Sold individually.
Silents blocks
- New
- New
Silents blocks
BRP OEM engine mount assembly for Sea-Doo. Complete original anti-vibration silent block ensuring engine mounting and absorbing vibrations to protect hull and rider. Assembled part ready to install.
- New
- New
Home
BRP OEM lower support for Sea-Doo. Ensures lower structural support of a jet ski component, resistant to mechanical stresses, vibrations and marine conditions. Sold individually.
- New
- New
Home
BRP OEM cooler foam for Sea-Doo. Provides thermal insulation and mechanical protection for the cooler, preventing vibrations and abrasion on the cooling circuit. Sold individually.
- New
- New
Home
BRP OEM 1.3mm shim for Sea-Doo. Enables play adjustment and precise setting of mechanical and propulsion components. Original factory-calibrated 1.3mm thickness. Sold individually.
- New
- New
Home
BRP OEM latch lever for Sea-Doo. Provides manual control of hood and panel closure mechanism, resistant to mechanical stresses and marine conditions. Sold individually.
- New
- New
Home
BRP OEM latch assembly for Sea-Doo. Complete original closure mechanism with integrated lever and spring, ensuring secure hold of hoods and panels. Vibration and water spray resistant. Sold individually.
- New
- New
Home
BRP OEM LH hood trim B-420 for Sea-Doo. Provides original left-side aesthetic trim for the engine hood, resistant to UV rays and marine conditions. B-420 model compatibility. Sold individually.
- New
- New
Home
BRP OEM black central luggage cover for Sea-Doo. Provides access and protection for the central luggage compartment in original black finish, resistant to UV rays and salt water. Assembled part ready to install.
- New
- New
Home
BRP OEM black upper front deflector for Sea-Doo. Manages airflow and water at the upper front of the jet ski in original black finish, improving rider comfort and equipment protection. UV and salt water resistant.
- New
- New
Home
BRP OEM center arm for Sea-Doo. Central structural part ensuring linkage and support of bodywork or steering elements, resistant to marine stresses and vibrations. Sold individually.
- New
- New
Home
BRP OEM upper front black trim for Sea-Doo. Provides original upper front black bodywork aesthetic trim, resistant to UV rays and salt water. Direct fit.
- New
- New
Home
BRP OEM right latch for Sea-Doo. Ensures secure closure and hold for the right-side panel or compartment, resistant to vibrations and salt water spray. Sold individually.
- New
- New
Home
BRP OEM elastic M8 nut housing for Sea-Doo. Floating M8 nut with anti-loosening elastic insert, enabling fastening without rear panel access and vibration resistant. Sold individually.
- New
- New
Home
BRP OEM cover brace for Sea-Doo. Structurally stiffens the cover, preventing flex and deformation under marine stresses and vibrations. Sold individually.
- New
- New
Home
BRP OEM left-hand side moulding for Sea-Doo. Provides original left-side bodywork aesthetic trim, resistant to UV rays, salt water and abrasion. Guaranteed original part.
- New
- New
Home
BRP OEM glove box door for Sea-Doo. Provides secure access to the front storage compartment with a closure resistant to water spray and vibrations. Guaranteed original part.
- New
- New
Home
BRP OEM right-hand mirror assembly for Sea-Doo. Complete original right-side rearview mirror with housing, glass and pivot mechanism, UV and salt water resistant. Assembled part ready to install.
- New
- New
Home
BRP OEM right-hand mirror shell assembly for Sea-Doo. Right-side rearview mirror housing protecting the mechanism and glass while ensuring original aesthetics. UV and salt water resistant.
- New
- New
Home
BRP OEM white left-hand mirror shell for Sea-Doo. Left-side rearview mirror housing in white finish, protecting the glass and mechanism while ensuring original aesthetics. UV and salt water resistant.
- New
- New
Home
BRP OEM left-hand side moulding for Sea-Doo. Provides original left-side aesthetic bodywork trim, resistant to UV rays and salt water. Direct fit, guaranteed original part.